GO WARRIOR ELITE and SAVE OVER $1100!
We understand you have choices when considering your Water Fed Window Cleaning Tools - and we want you to join our amazing line of customers who choose REACH-iT.
ELITE is the FULL KIT from Reach-iT for WARRIOR - it includes everything you will ever need - other than the PLUS A and PLUS B extensions, and your SPOT-FREE Water Solution.
INCLUDED IN YOUR ELITE PACK IS:
The WARRIOR Water Fed Window Cleaning Pole is a combination design based on both our early Reach-iT Poles PRO and MINI - we made WARRIOR noticeably MORE RIGID by changing the laminate plan to be over 30% Ultra-High Modulus Carbon fiber for Water Fed Window Cleaning FASTER, BETTER, SAFER!
Our goal is to maximize your efficiency. In seeking to guide you through the decision making process, we want to draw your attention to the fact that you will achieve more time savings and therefore achieve a higher hourly rate by focusing on how to clean FASTER, BETTER, and SAFER on 80% of the windows you clean, rather than you would by focusing on the much smaller percentage of the ‘highest windows’ you plan to clean.
This is the next generation WINDOW WEAPON, with a pivoting BLOCK - so the block stays square on the glass no matter the angle of your pole in relation to the glass.
RADIAL ROCKER Includes our best SCRUBS - 16 of our BEST!
RADIAL ROCKER has a ROCKING BLOCK so the SCRUB remains square on the glass, regardless the angle of the pole in relation to the glass, ensuring full, maximum 'lbs. per square inch' AGITATION FORCE in every stroke.
The 'arc' of bristles in the end caps, when 'rolled' through the corners dig out spider webs and debris with ease - the hardest aspect of water fed window cleaning to date, now solved with efficiency.
Remember: it's your technique that gives you your efficiency, so RADIAL is designed for The REACH-IT TECHNIQUE - it is a new training if you have not used a REACH-IT BRUSH before... but fortunately, it's very similar to the most efficient squeegee technique!
RADIAL is designed for HI-FLO TUBE : Increasing the flow rate in the rinse function (you rinse as you agitate with the brush on the glass - there is no second rinse action) means you can use MUCH LESS TIME, and ultimately LESS WATER VOLUME.
FITTING TO OTHER POLES : If you have a GARDINER or TUCKER angle adaptor (you can buy them for UNGER) - the teeth pattern on RADIAL PIVOT is the same as the teeth pattern on a GARDINER ANGLE ADAPTOR - undo the lever bolt and swap them out.
INTERLOCKING COMPONENTS: Made of many components that interlock making it ONE PRODUCT. RADIAL is BOLTED, not glued. It is not serviceable.
UNMATCHED AGITATION: The bristles are in the right place for cleaning frames, edges, corners, and windows.
HIGHEST QUALITY NYLON BRISTLES: RADIAL bristles will NOT DISTORT in temperatures as high as 60º.
BLADE OF BRISTLES: 100% coverage of the window surface with every single stroke.
TRIPLE TRIM BRUSH: RADIAL has 3 LEVELS OF BRISTLE ENGAGEMENT with the glass.
FITTED WITH HYDRO-BLADE II: Making it possible to bend the water exactly where you need it.
PIVOT: Designed to NEVER FAIL!! Giving you UNLIMITED ANGLES of ATTACK, including negative angles for cleaning windows below the waist.
BASE JETS: Fitted with 'blank' BASE JETS (included in the kit), so that you can add water under the brush for a more effective downstroke. The BASE BLADE acts like a SQUEEGEE.
THE REACH-iT DESIGN:
The Reach-iT design is all about the 80:20 RULE:
We ask you ‘What is the height range of windows that account for 80% of the glass you clean?” This is typically 1-2 stories for Residential and 1-4 stories for Commercial operators. We then ask “What is the maximum height windows you intend to clean any time in the future?” With the answers to these two questions, we are able to recommend a pole that is DESIGNED for the 80% of the windows you clean, and able to be extended any time in the future to reach the ‘highest windows you want to clean’.
To understand this better, consider that only 25% of the glass of a 4 story building is at 4 stories, 75% is 3 stories and below, 50% is 2 stories and below, and 25% of the windows (ground floor) could be cleaned by hand without a water fed pole!
WARRIOR is designed as a modular 3-4-story telescopic pole system that can be disassembled to clean lower windows, and extended with PLUS A and PLUS B to clean higher windows.
Standing at just 5ft 6” compact height, and 32.5ft of actual pole length (add 5ft Operator height to get ’37.5ft REACH’), WARRIOR has all the clamps at just above chest height (starting just 4ft 6" off the base), making it totally convenient to adjust the length of the pole at all times. Adding our new SHOCKSTOP Insulator Handle, adds an additional 5ft to the WARRIOR master.
WARRIOR is a 7-section telescopic pole, pulling apart at sections 1,3 and 5 to give you a shorter, lighter pole when working lower glass. Sections 1-5 give 30ft reach, Sections 1-3 give you a 20ft reach, and Section 1 on its own gives you 10ft reach. This is the essential Reach-iT design - a ‘Pole System’ designed specifically for Window Cleaning, pulling apart and extending one story at a time.
PLUS, to make the WARRIOR ELITE PACK, YOU ALSO GET:
Window Glass is almost always installed vertical, but where the Operator stands in relation to the glass varies depending on the geography around the building you are cleaning. If you are operating in a 3ft pathway with a fence beside you, your pole will be almost vertical, and, if the window is recessed, it is difficult to get the brush flat on the glass. In this case, using the 95º Gooseneck gives you the perfect solution. In another situation, you may need to be further away from the building - so we give you 110º, 125º and 140º goosenecks to guarantee you can access any glass on any job without having to contort your body. Designed to help you clean FASTER and SAFER.
We include a dedicated CONSTRUCTOR Brush with a EURO THREAD MOUNT to fit the goosenecks because you cannot use the GOOSENECKS with SIDE 2 SIDE (the gooseneck will 'jackknife' with the apex of the angle being too far away from the swivel pivot point.
MAX-REACH can extend your WARRIOR POLE horizontally up to 7ft.
This is ideal for glass awnings above walkways in shopping strips, for cleaning windows over doorway structures, and even the glass ceilings of elevated walkways.
MAX-REACH is unique to REACH-iT Poles because you need the ultimate rigidity to support the weight of the brush with a 7 FOOT DISPLACEMENT!
SCRUBS HOLSTER gives you the ability to carry 4 different SCRUBS on your belt while working with WINDOW WEAPON. The model is the 4x1 HOLSTER.
The RELOAD Holster is the latest innovation for WATER FED EFFICIENCY - carry a second brush (whether it is a WINDOW WEAPON, DEEP FRAME, or a 16" ALL-ROUNDER), so you can change out your brush for greater efficiency without needing to go back to your truck!
OPTIONS to EXTEND WARRIOR (not included):
PLUS A (extend 11ft)
Add PLUS A to your WARRIOR pole to extend it even further to reach high glass up to 55ft reach. PLUS A is an inverse 2-part telescopic pole that connects between sections 3 and 4 of your WARRIOR master pole. Made from High Modulus Carbonfiber, PLUS A is 6ft 2” compact, and adds 11ft 4” extension to your reach.
PLUS AB (extend 22ft)
Add PLUS AB to your WARRIOR pole to extend it even further to reach high glass up to 65 ft reach. PLUS A is an inverse 2-part telescopic pole that connects between sections 3 and 4 of your WARRIOR master pole. Plus B is an inverse 2-part telescopic pole that connects between sections 5 and 6 of your WARRIOR master pole. Made from Ultra-High Modulus Carbonfiber, PLUS A and PLUS B are 6ft 2” compact, and each adds 11ft 4” extension to your reach.
PLUS ABB (extend 34ft)
Add PLUS ABB to your WARRIOR pole to extend it even further to reach high glass to over 75ft reach. PLUS A is an inverse 2-part telescopic pole that connects between sections 3 and 4 of your WARRIOR master pole. Plus B are an inverse 2-part telescopic pole that connect between sections 5 and 6 of your WARRIOR master pole (you can connect two PLUS B one after the other. Made from High Modulus Carbon fiber, PLUS A and PLUS B are 6ft 2” compact, and each adds 11ft 4” extension to your reach.
OPTIONS for PURE WATER (not included):
DUAL DI TANK is a simple and low-cost Dual-Tank DI System that is ideal for the following conditions : IF YOU ARE:
- Starting out with Water Fed (less than 10 hours per week on external glass)
- Spending less than $1000 per year in DI RESIN
- Working in low water pressure environments
- Working in areas with TDS less than 150ppm
FLOW: RED+ is our latest advancement in Pure Water Filters - especially for use with RADIAL BRUSHES.
The evolution of RO-DI systems is critical now for users of brushes with more than 4 pencil jets - the maximizing of PRESSURE and FLOW-RATES is critical. This is the focus of FLOW RED+.