EBC Restorer is a revolutionary new product that replaces traditional hazardous acid cleaners. EBC Restorer formula works with excellent health and safety benefits, replacing hydrochloric, citrus, glycolic, phosphoric, nitric and other DOT hazardous acids. Composed of low pH organic salt combined with a special blend of cleaning agents, this product performs superbly in many cleaning and restoration projects including the removal of fire retardant powder that is often used to help slow down structure fires and wild fires.
- • Tire Marks• Rust Stains• Efflorescence• Concrete
- • Pavers• Tub & Tile • Grout• Urinals• Toilets• Showers
- • Mineral Deposits From all types of surfaces:
- Fire Retardant Powder
Heavy Oil/Grease Spots on Concrete: Pretreat with EBC Multipurpose Cleaner/Degreaser or degreaser of your choice. EnviroBioCleaner Restorer can be applied around oil/ grease areas to allow maximum penetration and dwell time for oil lifting process without 2-stepping the cleaning area. Do NOT introduce or add Sodium Hypochlorite (BLEACH) to process.
Light to Medium Tire Marks on Concrete or similar surfaces: Apply a dilution of 10:1 – 15:1 with water of Enviro Bio Cleaner Restorer directly onto the surface and immediately clean/rinse off with pressure washer wand or surface cleaner. Do dwell time as required.
Heavy Tire Marks on Concrete or similar surfaces: Apply a dilution of 5:1 – 8:1 with water of EBC Restorer directly on the surface and immediately clean/rinse off with pressure washer wand or surface cleaner. Repeat process if deep tire burns are still evident.
Light & Surface Rust Removal: Apply up to a dilution of 1:1 of EnviroBio- Cleaner Restorer with water. Apply directly to surface. Pre-wet area first for rust removal application due to ratio strength. Product will dissolve the rust slowly. For vertical surface, rust will dissolve the rust from top down without corrosive fumes. Agitation may be required for heavy stains. Rinse area with pressure washer.
Fire Retardant Powder Removal: Using a high draw chemical injector is the easiest way to achieve great results on surfaces such as concrete, stucco, vinyl, tile roofs plus so much more. Submerge your 10:1 chemical injector into undiluted EBC Restorer and apply directly to the surface, then soft wash all areas. Keep glass wet to avoid etching and keep off of painted or un painted wood surfaces.