Kit includes:
- Diffusers (14 for 3/4HP, 17 for 1HP)
- Impellers (14 for 3/4HP, 17 for 1HP)
- Box of 12 shims
- Viton Casing O-Ring
Use the drop down menu to choose between 1HP or 3/4HP
A Few Tools Needed To Rebuild.
- 10" Crescent Wrench (To remove GHT)
- (2) 7/16" Open End Wrenches or Ratchet (To remove Pro Switch)
- Flat Head Screw Driver
- O-Ring Grease
- Chain Wrench
- Clean rags
- Teflon Tape
- Thread Sealant
- Brass Wire Brush
- Straight Edge
Keep your work space clean and clear. Take a before photo to refer back to when re-installing. Same way you take apart - put back together the same way.
Watch our attached video and the rebuild for the 1 HP & 3/4HP are the same except the overall number of impellers and diffusers differ. Good Luck and call our store if you need any additional help.